Zte F689 Bridge Mode |link| | 2025-2027 |

Enabling Bridge Mode on the (typically an ONT/Gateway provided by ISPs like Claro) allows you to bypass the device's internal routing and use your own high-performance router. This setup eliminates Double NAT

Network Details: Identify if your connection uses PPPoE (requiring a username and password) or DHCP (dynamic IP), and check if a specific VLAN ID (e.g., 881 for some fiber networks) is required. Standard Configuration Steps Zte F689 Bridge Mode

: Open a web browser and enter the modem's IP address (commonly 192.168.1.1 192.168.20.1 Enabling Bridge Mode on the (typically an ONT/Gateway

• Click Edit (Pencil icon) on the Internet connection.
• Scroll to Connection Mode or WAN Connection Type.

Step 6: Reboot the ZTE F689

• Go to Management > Reboot.
• Click Reboot. The device will restart.

ZTE F689 Bridge Mode Configuration Guide

1. When to Use Bridge Mode

• You want to use your own router (e.g., Asus, TP-Link, MikroTik) for advanced routing, QoS, VPN, or port forwarding.
• You need to avoid double NAT.
• The ISP’s ONT routing/Wi-Fi is poor or unreliable.