Zinc Anode 620 Datasheet Here

Introduction

🔹 Ordering Information

• Part Number: ZA-620
• Packaging: Individually boxed or bulk (50 pcs/carton)
• Compliance: RoHS, REACH, NACE SP0387

Zinc Content: Contains over 80% zinc by weight in the dry film. Volume Solids: 62% ± 2%. zinc anode 620 datasheet

: Do not apply if relative humidity exceeds 85% or if the temperature is within 3°C of the dew point. : 8 hours at 25°C, reducing to 2 hours at 45°C. www.bergerarabiapc.com Drying & Overcoating Times (at 25°C) 5–20 minutes 3–6 hours Min Overcoating 2–12 hours Max Overcoating Indefinite (if surface is clean) Introduction 🔹 Ordering Information

2. Chemical Composition (Per ASTM B418 Type I & II)

The performance of a zinc anode is entirely dependent on its purity. Impurities (iron, copper, lead) cause passivation, where the anode stops working. The Zinc Anode 620 must meet strict limits: Part Number : ZA-620 Packaging : Individually boxed

The Zinc Anode 620 has the following performance characteristics:

Discharge Characteristics (Typical)

• Impedance: High internal resistance compared to Alkaline.
• Performance: Best suited for low-drain, intermittent use (flashlights, radios).
• Cut-off Voltage: Typically 0.8V – 0.9V.