Xy-w58cdt9-av7 Manual

The XY-W58CDT9-AV7 is a high-performance LCD monitor controller board (often called an AD board or driver board) based on the MStar TSUMU58CDT9-1 chipset. It is designed to convert digital video signals (HDMI/VGA) into the LVDS format required by TFT-LCD panels. 🛠️ Key Technical Specifications

• Power Source: Ensure the voltage matches the specifications on the label before connecting to a power source.
• Water Resistance: The XY-W58CDT9-AV7 is rated IP54. Do not submerge in water.
• Ventilation: Do not block ventilation openings. Install in accordance with the manufacturer's instructions.
• Servicing: Do not attempt to service this product yourself. Refer all servicing to qualified service personnel.

. While a single formal "long-form review" is not a standard consumer item, technical documentation and professional feedback from platforms like AliExpress xy-w58cdt9-av7 manual

The board is typically controlled via a separate button pad with the following standard functions: Accesses the On-Screen Display (OSD) settings. Input/Source: Switches between HDMI and VGA signals. Up/Down/Left/Right: Navigation within the OSD menu and volume control. Auto Adjust (Down Key): Power Source: Ensure the voltage matches the specifications

2026-03-01 — Record equipment purchase on account DR Equipment (xy-w58cdt9-av7) 12,000 CR Accounts Payable 12,000 000 CR Accounts Payable 12

• XY-W58 (Wi-Fi module)
• W58CDT9 (possible LCD screen assembly)
• AV7 (maybe a firmware or hardware revision)

3. Common device matches for “XY-W” prefix

The XY-W series is often used for:

Chapter 10: Technical Specifications (Reference Data)

| Parameter | Value (Typical for XY-W58CDT9-AV7) | |--------------------------|------------------------------------------------| | Supply voltage | DC 7V to 32V (or AC 7V to 30V depending) | | Power consumption | < 1W (idle), < 2W (relay active) | | Relay contact rating | 10A @ 250V AC / 10A @ 30V DC | | Time range | 0.1 seconds to 999 minutes (depends on base) | | Accuracy | ± 2% of set time (typical) | | Trigger input | Active high (3-30V) / Active low (0-0.8V) | | Operating temperature | -20°C to +60°C | | Dimensions (PCB) | Approx. 60mm x 45mm x 18mm |