Xprinter Xp420b Wifi Setup ❲Essential❳

Setting up the Xprinter XP-420B Go to product viewer dialog for this item.

Scan for Networks: Click "Scan" to find your local Wi-Fi networks. Select your SSID and enter your Wi-Fi password. Assign IP Address: xprinter xp420b wifi setup

Настройка WI-FI принтера этикеток Xprinter XP-420B Setting up the Xprinter XP-420B Go to product

If the IP address is something other than 0.0.0.0 (e.g., 192.168.1.50), the WiFi setup was successful. Installing the Driver via IP Address Ensure the printer is ON and connected via

Setting Up Your Xprinter XP420B on WiFi: A Step-by-Step Guide

The key takeaway: Do not try to set up WiFi via the control panel alone. Use the USB Network Tool (Method 1). It gives you 100% control over the IP, security, and connection.

Step 3: Configure the Wireless Settings

  1. Ensure the printer is ON and connected via USB to your computer.
  2. Open the Xprinter Network Tool.
  3. Click "Refresh" or "Search Device." Your XP420B should appear with an IP address (likely 192.168.1.100 or similar in config mode).
  4. Click on the device to highlight it.
  5. Click "Configure" or "Network Settings."
  6. Switch the "Wireless Mode" to "Station" (This tells the printer to act like a client, not a hotspot).
  7. Click "Scan" to find your home/office WiFi.
  8. Select your SSID (WiFi name).
  9. Enter your WiFi Password (Case sensitive!).
  10. Security Type: Usually WPA2-PSK/AES.
  11. IP Mode: Select "DHCP" (Automatic) unless you need a static IP for advanced networking.
  12. Click "Save" or "Write."

Sharing Across Multiple Computers

Once the XP420B is on WiFi, every computer on the same network can add it.

waggish