Xinje Plc Usb Driver Install !!top!! Page

To install the USB driver for a , you typically need to install the COM-USB driver from the official Xinje website or ensure it is bundled with your programming software (like XDPPro or XCPPro). This driver allows your PC to recognize the USB-to-RS232 programming cable used for communication. Step-by-Step Installation Guide Download the Driver: Visit the official Xinje Download Center

  1. Plug the PLC into the PC.
  2. Open Windows Device Manager (Right-click Start button > Device Manager).
  3. Look under "Other Devices" or "Ports (COM & LPT)". You should see a device labeled something like Xinje Virtual Comm Port or possibly an unknown device with a yellow exclamation mark.
  4. If you see the device listed under "Ports" without a yellow icon: You are likely good to go! Note the COM port number (e.g., COM3) and open the XD/XC Pro software to configure it.

Part 10: Frequently Asked Questions (FAQ)

Q: My XINJE XD PLC shows “USB Device not recognized” on Windows 11. A: Windows 11’s stricter USB stack is the culprit. Run the installer in Windows 8 compatibility mode (Right-click → Properties → Compatibility → Run this program for Windows 8). xinje plc usb driver install

: For standard serial-to-USB connections, the default baud rate is often , with Even parity and 1 stop bit. or help identifying the specific driver version for your Windows OS? Download Center - Wuxi Xinje Electric Co., Ltd. To install the USB driver for a ,

  • Xinjie PLC device
  • Computer with a USB port (Windows-based)
  • Xinjie PLC USB cable
  • Xinjie PLC USB driver software (downloadable from the manufacturer's website)