Visual Audio Splitter Amp- Joiner 12 Serial _hot_ Page

The Signal Weaver

The Hybrid Topology

Most audio gear is either a splitter (1 in, many out) or a joiner (many in, 1 out). Rarely do you find both in a 1U or 2U rack chassis. The Visual Audio Splitter Amp-Joiner 12 Serial contains twelve independent sections. Each channel strip generally features: visual audio splitter amp- joiner 12 serial

  1. PCB Layout: A 4-layer PCB with a ground plane to minimize noise and interference.
  2. Components: Surface-mount components (e.g., SMD: 0805, 1206) to minimize size and improve reliability.
  3. Power Supply: A +12V DC power supply with a 500mA current rating.

Serial Control: Features like RS-232 serial ports allow the device to be controlled by automation systems such as Control4, Crestron, or Elan for seamless operation. Key Hardware Options The Signal Weaver The Hybrid Topology Most audio

Mode B: Serial Amplification Chain (Amp)

Set all toggles to THRU. Set each Join Gain pot progressively (e.g., Stage 1: +3dB, Stage 2: +4dB, etc.). The signal cascades through all 12 stages. If final Master Volume is at 0dB, the final output is the product of all gains: Total Gain (dB) = Σ (Join Gain N). With max gain per stage (+20dB), the theoretical total is +240dB—though in practice, noise and oscillation become extreme after +60dB. The visual LEDs saturate red by Stage 9. PCB Layout: A 4-layer PCB with a ground