Ts1162 Installation Manual |verified|

The TS-1162 manual outlines installation, operation, and maintenance for the Santa Fe Advance100 dehumidifier, designed for crawl spaces and basements. Key sections include technical specifications, safe installation procedures, proper drainage, and air filter maintenance for this 100-pint unit. The document provides detailed guidance on setting up the unit, ensuring proper airflow, and utilizing optional ducting configurations.

Includes an input for Request to Exit (RTE) control and an open collector output for controlling door relays or strikes. ts1162 installation manual

: The keypad connects directly to the Challenger RS-485 LAN and can be situated up to from the main panel or Intelligent Access Controller. Addressing : You must use DIP switches 1 through 4 on the unit to set its unique RAS address. Inputs & Outputs : Features a dedicated input for a Request to Exit (RTE) sensor or push-button. Open Collector Output Mounting: This section is excellent

• Mounting: This section is excellent. It clearly illustrates how to slide the mirror base onto the windshield bracket and torque the set screw. It accounts for different windshield types (those with specific Toyota brackets), which is a helpful detail.
• Wiring: This is the weakest link in the manual. The manual instructs the user to route the wire to the overhead console or fuse box but lacks specific guidance on panel removal. For a vehicle like a Toyota Tundra or Tacoma, prying off the A-pillar cover or overhead console without breaking clips is the hardest part of the job—the manual offers no tips on this.
• Electrical Connection: If your kit includes the wire tap harness, the manual explains how to crimp it, but it does not specify which fuse positions are best for switched power. Users will likely need to consult a fuse box diagram elsewhere.

Step 2: Bracket Assembly (If applicable)

• Some TS1162 configurations require you to pre-assemble the metal brackets (clips) onto the underside of the rail.
• Slide the carriage bolts into the channel on the bottom of the rail.
• Attach the mounting clips to the bolts but leave them loose enough to allow for adjustment.

Completeness:

Addressing: Use the internal DIP switches (typically switches 1–4) to set the unique RAS address on the LAN. Step 2: Bracket Assembly (If applicable)

• Socket Wrench.
• Sockets (typically 10mm or 13mm—check specific manual).
• Flat-head screwdriver or trim removal tool (for accessing factory covers).
• Torque wrench (highly recommended for proper tightening).
• Clean cloth/Isopropyl alcohol (for surface preparation).