Sign Up
Login
Login

Traice Dvr Password Reset Page

Report: Traice DVR Password Reset Procedures

With the heist's clock ticking, Elias took a final, drastic step. He unscrewed the DVR's casing, exposing the motherboard. Nestled among the circuits was a small silver battery. He knew that removing it for a few minutes would clear the volatile memory, often reverting the unit to its original settings. traice dvr password reset

A factory reset will typically wipe your network and recording settings, but your footage usually remains on the hard drive. or the specific mobile app for your model? 4 Easy Ways to Password Reset Dahua XVRs, NVRs and Cameras 03-Oct-2022 — Report: Traice DVR Password Reset Procedures With the

Pre-Requisites for Traice DVR Password Reset Using tweezers, move the jumper cap from pins

If your Traice DVR is a rebranded Hikvision or similar OEM model, you can use specialized tools:

  • Using tweezers, move the jumper cap from pins 1-2 to pins 2-3 (or simply remove it if it’s a two-pin setup).
  • Wait 10 seconds. Move the jumper back to its original position.
  • Alternative method (older boards): If there is no jumper, look for a small black button (tactile switch). Press and hold it for 30 seconds while the DVR is powered off.
  • Reassemble the DVR and power it on.
    1. Connect a USB-to-TTL converter to the DVR’s serial pads (Tx, Rx, GND).
    2. Use software like PuTTY (115200 baud).
    3. Interrupt the bootloader (press a key like Ctrl+C or Enter during startup).
    4. Run commands such as: reset_default or passwd admin 12345. (Note: This voids warranties and requires technical skill.)

    Before attempting a hard reset, try the most common factory credentials. Many units ship with: (blank/empty), 12345, 123456, or 111111 2. Hard Reset via Physical Button

    If there is no external reset button, you may need to access the internal motherboard. Warning: This may void your warranty. Open the Casing: Unscrew the outer shell of the DVR.

    0