Screenly Anthias Portable Here

Screenly Anthias for Portable Digital Signage: Architecture, Deployment, and Use Cases

Abstract
Digital signage has traditionally relied on fixed infrastructure, limiting its application in dynamic, temporary, or mobile environments. This paper examines Screenly Anthias, an open-source digital signage platform, and evaluates its viability for portable deployments. We propose a lightweight architecture leveraging Raspberry Pi hardware, battery power, and Wi-Fi tethering to enable fully portable digital signage. The study includes a technical deployment guide, power consumption analysis, and practical use cases such as event signage, emergency information systems, and mobile retail displays. Results indicate that Screenly Anthias, with minor configuration adjustments, can operate reliably in portable mode for 6–10 hours on standard battery packs, offering a cost-effective and flexible alternative to proprietary solutions.

Connect your laptop or smartphone to the same Wi-Fi network as the Raspberry Pi. Type the provided IP address into your web browser. screenly anthias portable

); // for touch devices: pause on touchstart but resume after some time? we do basic resume on touchend. container.addEventListener('touchstart', () => pauseAutoRotateTemporarily(); ); container.addEventListener('touchend', () => // resume after short delay setTimeout(() => if (!autoRotateInterval) resumeAutoRotate(); , 4000); );

8. Conclusion

Screenly Anthias, originally designed for fixed digital signage, can be effectively repurposed for portable deployments with modest hardware and software adjustments. Our prototypes demonstrate runtime from 7–10 hours, offline operation, and rapid setup. The open-source nature allows customization not possible with commercial alternatives. For events, fieldwork, and mobile retail, Anthias on Raspberry Pi offers a practical, low-cost portable signage solution. The study includes a technical deployment guide, power

What is Screenly Anthias Portable?

// update dots active state const dots = document.querySelectorAll('.dot'); dots.forEach((dot, idx) => if (idx === currentIndex) dot.classList.add('active'); else dot.classList.remove('active');

Getting started with the Screenly Anthias Portable is easy. Here's a step-by-step guide to help you get up and running: Type the provided IP address into your web browser

Cable management:

The story of Screenly Anthias (formerly known as Screenly OSE