Satlink Ws-6979 Software Upgrade — Exclusive

Mastering the Satlink WS-6979: The Ultimate Guide to Software Upgrades

In the world of satellite television installation and maintenance, having a reliable field meter is non-negotiable. The Satlink WS-6979 has earned its reputation as a workhorse for professionals and hobbyists alike. It’s a multi-functional device capable of signal finding, spectrum analysis, and even supporting various satellite protocols like DiSEqC and Unicable.

Step 6: Automatic Detection The device will automatically scan the SD card. It will display: Satlink Ws-6979 Software Upgrade

Do not fear the upgrade. With this guide, you have the roadmap to breathe new life into your Satlink WS-6979. Happy satellite hunting! Mastering the Satlink WS-6979: The Ultimate Guide to

Upgrading the software on your Satlink WS-6979 combo meter is Turn on the WS-6979

Wait: A progress bar will appear. Do not touch any buttons or power off the device until it finishes.

1. Turn on the WS-6979.
2. Go to Menu > System Setting > Data Transfer.
3. Select Backup to SD Card.
4. Name the file backup_ws6979.bin.
5. Eject the SD card and copy that file to your computer desktop as a safety net.

How to obtain the firmware

• Primary source: the manufacturer’s official support/download page or an authorized distributor. Look for firmware files clearly labeled for “WS-6979” and check release notes or file version/date.
• Secondary sources: user manuals, reputable manuals repositories (e.g., ManualsLib) and community forums or video walkthroughs showing WS-6979 upgrades. Exercise caution: verify checksum or vendor confirmation when possible.
• Do NOT use firmware intended for other Satlink models (e.g., WS-6980, ST-6986) unless vendor explicitly states cross-compatibility.

Short checklist for one-minute readiness

• Battery full or external power ready — yes/no
• Correct WS-6979 firmware file on FAT32 USB at root — yes/no
• Backups of settings made (if needed) — yes/no
• Follow manual’s update steps and do not interrupt — yes/no

Step 3: Power Cycle the Satlink Turn off the WS-6979 completely using the side power switch. Wait 10 seconds.