Skip to content
samsung scx4623f internal error including corrupted data verified swiftDialog

Internal Error Including Corrupted Data Verified !exclusive! | Samsung Scx4623f

The "INTERNAL ERROR - Including Corrupted Data" message on a Samsung SCX-4623F printer typically indicates a breakdown in communication between the computer and the printer hardware. This occurs when the printer receives a print command but the data packet is incomplete, incorrectly formatted, or interrupted, leading the printer to "verify" that the data is unusable. Primary Causes

  • Solution: Replace the mainboard (logic board). Look for part number JC92-03467A or JC92-03474B.
  • Note: Replacing the board requires a new imaging unit initialization and may cost more than the printer is worth. Consider replacement cost.

The Samsung SCX-4623F is a multifunction printer that offers printing, scanning, copying, and faxing capabilities. While it is a reliable device, some users have reported encountering an internal error message that includes the phrase "corrupted data verified." In this article, we will explore the possible causes of this error, its symptoms, and provide troubleshooting steps to resolve the issue. The "INTERNAL ERROR - Including Corrupted Data" message

  1. Power Surges or Improper Shutdown: If the printer loses power while writing to memory (e.g., during a firmware update or while processing a large print job), the file system can become corrupted.
  2. Faulty Print Jobs (Spooler Crash): A corrupted PDF, a Word document with embedded errors, or a driver conflict can send a "junk" data stream to the printer. The printer stores this in its RAM, and upon reboot, it tries and fails to verify it.
  3. Failing NAND/Flash Memory: Over years of use, the internal storage chip can develop bad sectors. Once data is written to a bad sector, the "corrupted data verified" error becomes permanent until the memory is cleared or reset.
  4. Incomplete Firmware Update: Interrupting a firmware update (even by pressing the cancel button) guarantees data corruption.

Select your country/region and confirm. The printer will restart and clear its internal memory. 6. Firmware Updates Solution: Replace the mainboard (logic board)