Qidi X-pro Manual Verified 【Extended ◉】

The QIDI X-Pro is a versatile, fully enclosed 3D printer featuring a unique dual direct-drive extrusion system designed for multi-material and multi-color printing. While the machine is largely pre-assembled, effective operation depends on following a precise setup and maintenance routine. Initial Setup and Unboxing

Part 5: The Slicer Software – Translating the Manual

The physical manual comes with a separate "Software Quick Start" guide for QIDI Slicer (a customized version of Cura). qidi x-pro manual

12. Common G-Code Commands (Manual Use)

| Command | Function | |---------|----------| | G28 | Home all axes | | G29 | Auto-bed leveling (if enabled) | | M104 S205 | Set extruder 1 temp to 205°C | | M140 S60 | Set bed temp to 60°C | | M141 S45 | Set chamber temp to 45°C | | T0 / T1 | Switch to extruder 0 (left) or 1 (right) | The QIDI X-Pro is a versatile, fully enclosed

1. Lubrication: The X-Pro uses rods for movement. Every 2-3 months, apply a small amount of lithium grease (included in the toolkit) to the X and Y-axis rods.
2. Bed Cleaning: The build plate surface is durable, but oils from your hands ruin adhesion. Wipe it down with isopropyl alcohol before every major print.
3. Nozzle Cleaning: The X-Pro is a "Bowden" style printer. If you have clogs, the manual instructs on how to remove the nozzle. Keep a pack of cleaning needles handy—they are faster than taking the hotend apart.

6. Safety & Maintenance (End of Manual)

• Power supply: 24V DC. Use grounded outlet.
• Firmware updates: Require an SD card (not USB). Follow the exact step sequence – a mismatch can brick the board.
• Lubrication: Linear shafts every 3 months with light machine oil (not grease).

While the physical box includes a quick start guide, the real magic (and troubleshooting) lies in understanding the full scope of the QIDI X-Pro manual. Lubrication: The X-Pro uses rods for movement

• Pro Tip: Don’t rush this. Level all four corners, then return to the first corner and do it again. Springs settle quickly. A perfectly level bed is 90% of the battle with this machine.

Follow the on-screen prompts to move the extruder to the three main adjustment points. Place a piece of A4 paper between the nozzle and the bed .

Are you planning to use both extruders for a multi-color print, or are you just getting started with basic PLA printing? I can give you specific settings for either. Makerspace - Chalon M3LAB: 3D Printing Stations