Neoprogrammer V2.2.0.10 | 2024-2026 |
You can adjust the tone (more beginner, more critical, or more technical) as needed.
Preparation: Put Windows into Test Mode to install unsigned CH341A drivers included in the NeoProgrammer ZIP package. Neoprogrammer V2.2.0.10
- Add neoprogrammer config pointing to codebase.
- Run synth with --incremental to generate scaffolding only for missing handlers.
- Use differential test step to validate behavioral compatibility.
- Commit generated artifacts and CI pipeline steps.
The Good
1. Wide Device Support
This version supports hundreds of SPI chips up to 128Mbit (16MB). From common 25xx series to more niche parts, it’s rare to find a chip it doesn’t at least recognize. The auto-detect feature works reliably about 95% of the time. You can adjust the tone (more beginner, more
Data Recovery: Reading configuration data directly from small memory ICs when the main device is non-functional. Add neoprogrammer config pointing to codebase
- OS: Windows (XP, 7, 8, 10, 11). 32-bit and 64-bit supported.
- Hardware: A compatible programmer device (most commonly the CH341A Black/Green Edition, or specialized hardware like the Vertyanov analyzer).
Expanded Chip Support: Supports over 3,000 chip types, including SPI NOR, I2C, and SPI NAND flash memories.
- If using a clip (e.g., SOIC clip) to read a chip soldered to a motherboard, ensure pin 1 on the clip aligns with pin 1 on the chip (usually indicated by a dot). The chip must also be powered correctly (some clips power the chip via the programmer, others require the board to be powered on).
| Feature | Neoprogrammer V2.2.0.10 | AsProgrammer | FlashROM (CLI) | |---------|------------------------|--------------|----------------| | Price | Free | Free | Free | | GUI | Excellent (modern) | Basic | None | | Speed (CH341A) | ~5-6 KB/s (SPI) | ~4 KB/s | ~5 KB/s | | I2C Support | Full + auto timings | Limited | Manual only | | Batch mode | Yes | No | Scriptable | | Chip detection | Automatic | Manual ID entry | Manual |