Microsoft Navigation Gps 168 Model 1372 ^hot^ Direct

Microsoft Navigation GPS 168 (Model 1372) is a legacy USB GPS receiver originally bundled with Microsoft Streets & Trips software during the mid-to-late 2000s. Microsoft Source Hardware & Accessories

Step 3: Force a Serial Connection

  1. Go to Device Manager -> Ports (COM & LPT).
  2. The driver will assign a COM port (e.g., COM4).
  3. In Microsoft Streets & Trips (if you can run it in compatibility mode), go to Tools -> GPS Settings -> Configure GPS.
  4. Select the correct COM port and set Baud rate: 4800, Data bits: 8, Stop bits: 1, Parity: None.
  • Time to First Fix (TTFF): Cold starts took about 30–45 seconds; warm starts were nearly instant.
  • Accuracy: It was accurate within 5–10 meters, which was standard for consumer GPS

Troubleshooting Tip: If you're having trouble on Windows 7 or 10, check the JustAnswer forum for specific 64-bit driver workarounds, as the legacy drivers weren't always natively compatible with newer 64-bit architectures. microsoft navigation gps 168 model 1372

Part 1: The Real Identity – The Pharos GPS-168

What is the GPS-168?

The Pharos GPS-168 (often labeled OEM-168 on the circuit board) is a GPS receiver with a PS/2 or Serial (RS-232) connector. It was a popular "GPS mouse" designed to sit on a car dashboard. Microsoft Navigation GPS 168 (Model 1372) is a

Step 1: Identify the Connector

If the end looks like a round mouse/keyboard plug, that is PS/2. You need a PS/2 to USB active adapter (not a simple pin converter). Alternatively, find a docking station or old laptop from 2005 that has a native PS/2 port. Go to Device Manager -> Ports (COM & LPT)

Part 2: Decoding the "Model 1372" Anomaly

Let’s address the elephant in the room. Why 1372?