Jmm-al10 Test Point Review

While there isn't a single definitive long-form article titled "JMM-AL10 test point," various technical resources and guides discuss this hardware entry point for the Huawei Honor V9 Play (JMM-AL10)

Gather necessary tools: You will need a compatible Huawei device, a computer, and a USB cable. Additionally, you may require specialized software, such as Huawei's HiSuite or a third-party tool.
Enable Developer Options: On your Huawei device, go to Settings > About phone > Build number, and tap on it seven times to enable Developer Options.
Connect to computer: Connect your device to a computer using a USB cable.
Use software to access test point: Launch the required software (e.g., HiSuite) and follow the on-screen instructions to access the JMM-AL10 test point.

Visual Identification: Look for a small copper gold pad or a cluster of contact points near the USB charging port area or underneath the metal shield (EMI shield) on the lower part of the motherboard.
Specific Location: It is often labeled or is a specific uncovered pad. In many Huawei Y7/Honor 7 Lite diagrams, it is a single gold pad labeled TP or located near the micro-USB connector flex.
The Method: You need to identify two points: the Test Pad and Ground (GND). Usually, this involves shorting the specific Test Pad to a Ground point (like a metal shield or a negative battery terminal).

On the JMM-AL10 motherboard, the test point is typically located near the battery connector or the Kirin chipset. It consists of a single small gold dot that must be shorted to a "Ground" (any nearby metal shield or the battery negative terminal). Step 3: Trigger COM 1.0 Mode Disconnect the battery cable from the motherboard. jmm-al10 test point

Note: Finding a clear image of this specific board can be difficult, but it is often one of the isolated pins near the top right of the main board section. The Procedure: Disconnect the battery. While there isn't a single definitive long-form article