Iwata 2crh Bundy Clock Manual

The Iwata 2CRH is designed for high visibility and reliable operation in diverse workplace environments, from small offices to industrial settings. Beyond Hygiene Dual Time Display

(Remaining: related search term suggestions.) iwata 2crh bundy clock manual

Note: The clock does not auto-adjust for months or leap years. Adjust manually on the 1st of each month. The Iwata 2CRH is designed for high visibility

Operates on DC13V 1A; consumes 2W in standby and 10W during active use. Open the Cover: Unlock and open the case

Placement: Mount on a wall using the rear holes or place on a stable, flat surface away from direct sunlight or heat. Power: Connect the DC13V 1A adapter to a stable outlet.

1. Open the Cover: Unlock and open the case.
2. Remove Old Ribbon: Gently pry the old ink ribbon spools off their mounts. Note the path the ribbon takes (usually weaving through metal fingers).
3. Install New Ribbon: Place the new spools on the mounts. Ensure the ribbon unwinds from the correct side (usually the left spool feeds to the right).
4. Tension: Rotate the spool knob slightly to tighten the ribbon.
5. Test: Insert a scrap card to test the print quality.