How To Reset Sharp Ar-6020 Repack May 2026

Short story — "Reset"

Marta had never meant to wake a town.

Alternative sequence (depending on firmware revision): how to reset sharp ar-6020

When to Call a Professional

If after learning how to reset the Sharp AR-6020 you still see: Short story — "Reset" Marta had never meant

Power Up: Toggle the main switch back on, wait for the green status light to stop flashing, and then press the panel power button. Resetting Error Codes via Simulation Mode Turn off the printer and unplug it for

  1. Turn off the printer and unplug it for 15 minutes (this resets the thermal fuse logic).
  2. Plug it back in and turn it on. If H2 returns:
  3. Enter Maintenance Mode (# + * simultaneously).
  4. Type 14 (Simulation 14 cancels fuser errors).
  5. Press Start. The error should clear.
  6. Press CA twice to exit.

Step 2: Press and Hold the [Clear] and [CA] Buttons

Open the front cover and toggle the Main Power Switch (located on the bottom left) to OFF. Wait 10 seconds before switching it back on.