For the FANUC Series 0i-F Plus, the "Programming Manual" content is typically integrated into the Operator's Manual
| Code | Group | Description |
| :--- | :--- | :--- |
| G00 | 01 | Rapid Traverse. Moves the tool at maximum speed (non-cutting). |
| G01 | 01 | Linear Interpolation. Cutting feed in a straight line. |
| G02 | 01 | Circular Interpolation CW. Cutting arc (Clockwise). |
| G03 | 01 | Circular Interpolation CCW. Cutting arc (Counter-Clockwise). |
| G32 | 01 | Threading. Used for straight/taper threading. |
| G28 | 00 | Reference Point Return. G28 U0 W0 sends turret home. |
| G40 | 07 | Cutter Compensation Cancel. |
| G41 | 07 | Cutter Compensation Left. |
| G42 | 07 | Cutter Compensation Right. |
| G50 | 00 | Coordinate System Setting / Max RPM Clamp. |
| G96 | 02 | Constant Surface Speed (CSS). Maintains surface speed as diameter changes. |
| G97 | 02 | Constant RPM. Revolutions Per Minute mode. | fanuc series oitf plus programming manual
Contains G-codes, M-codes, and syntax for turning operations. [5.21, 5.31] Operator's Manual For the FANUC Series 0 i -F Plus
The FANUC Series 0i-TF Plus Programming Manual is not merely a list of codes; it is a technical reference for extracting the full potential of a CNC lathe. Mastery of this manual allows a programmer to move beyond simple "G-code pushing" and into high-efficiency, high-precision machining. It enables the creation of flexible, error-proof programs through macro logic and intelligent use of canned cycles. Safe programming practices : Guidelines for creating safe