FANUC Parameter #8901 is a critical bit-setting used to control the retention of workpiece coordinate systems (G54-G59, etc.) during specific reset or power-cycle conditions. When enabled (set to 1), it prevents the CNC from accidentally clearing or defaulting the work offsets stored in the G54 range, providing a layer of security against data loss and setup errors.
of this parameter allows maintenance personnel to temporarily "shield" or bypass the alarm to keep the machine running while waiting for a replacement fan. Function and Settings The parameter is typically labeled (or PRM) and operates on a bit-level basis: Bit 0 (Value = 0): fanuc parameter 8901 better
Fanuc parameter 8901 bit 0 (FAN) is a maintenance setting used to control the detection of fan motor errors. It is most commonly modified to bypass the ALM701 (Fan Motor Overheat) alarm, which occurs when a control unit fan fails or runs too slowly. Understanding Parameter 8901#0 Function and Settings The parameter is typically labeled
Conclusion
Fanuc parameter is primarily used to mask the ALM701 fan overheat alarm on CNC systems like the Series 0i-B, 0i-C, and 18i-TB. Core Function and Use Alarm Suppression : Setting bit 0 of parameter 8901 to Core Function and Use Alarm Suppression : Setting