Fanuc 11m Parameter List [new]
Note: The FANUC 11M is an older CNC control. Parameters vary by machine tool builder (e.g., Mori Seiki, Mazak, Kitamura). Always refer to your machine’s original parameter manual or backup before making changes.
| Parameter Range | Category | Description |
| :--- | :--- | :--- |
| 0000 – 0059 | Option Parameters (NC) | Enables live tooling, rigid tapping, custom macros, DNC, etc. |
| 0060 – 0089 | Axis Configuration | Stroke limits, axis direction, mirror image. |
| 0090 – 0109 | Feedrate & Acceleration | Rapid traverse (G00), cutting feedrate limits (G01). |
| 0110 – 0139 | Servo & Motor Parameters | Position loop gain, feedforward coefficient, backlash compensation. |
| 0140 – 0159 | Reference Point | Grid shift, reference return direction, deceleration points. |
| 0160 – 0199 | Spindle Parameters | Gear ratios, C-axis control, orientation stop position. |
| 0200 – 0239 | Coordinate System | Absolute/incremental, diameter programming, I/J/K specifications. |
| 0240 – 0259 | Tool Offset | Number of tool offsets, length/radius type, wear compensation. |
| 0260 – 0299 | Automatic Operation | Single block, dry run, feed hold behavior. |
| 0300 – 0319 | Editor & Program | Tape coding (ISO/EIA), punch code, program number lock. |
| 0320 – 0359 | Communication (RS-232) | Baud rate, stop bits, parity, DC code control (Xon/Xoff). |
| 0360 – 0399 | Diagnostic Parameters | Self-diagnostic thresholds, watchdog timers. |
| 0400 – 0429 | Pitch Error Compensation | Compensation points per axis, interval, direction. |
| 0430 – 0549 | SERVO PARAMETERS (Critical) | Requires IPL mode to change. (Motor model, current limit, velocity gain, PWM frequency). |
| 0900 – 0939 | Option Parameters (High Security) | Hideable via parameter 10.4. Control software options. |
| 5000 – 9199 | Macro & Customization | User macro variables, arguments, and local variables. | fanuc 11m parameter list
Before modifying any parameters, you must put the machine in MDI mode and unlock the memory: Note: The FANUC 11M is an older CNC control
The following is a detailed list of Fanuc 11M parameters, grouped by category: Cause: Stroke limit parameters (0700 series) are set
- Cause: Stroke limit parameters (0700 series) are set too tight or battery loss corrupted them.
- Fix: Set parameters 0700 (positive stroke limit for X) and 0701 (negative stroke limit for X) to large values like
±99999999 temporarily, then home the machine and reset correctly.
⚠️ Important Warning:
Use this list as a reference guide only. CNC parameters control machine-specific functions (axis travel limits, spindle speeds, tool changers). Entering incorrect values can cause the machine to crash, lose reference points, or behave erratically. Always back up current parameters before making changes.
Soft limit setup:
Program Parameters
