Everstart Battery Charger 60108m Manual Here

The EverStart 60108M is a 12V smart digital charger featuring 2A, 10A, and 25A rates, alongside an automatic reconditioning mode for battery revival. Key operation involves connecting clamps to the battery, selecting settings, and using the automatic maintenance mode for safe charging. View a detailed walkthrough at

Charger Precautions:

When to replace the battery

• Repeated inability to hold charge, visible damage, severe sulfation, or internal shorting warrant replacement. A battery load test at a shop provides definitive assessment.

Everstart Battery Charger 60108m Manual: The Complete Guide to Operation, Safety, and Troubleshooting

If you own a vehicle, boat, lawn tractor, or any piece of equipment with a lead-acid battery, a reliable charger is an essential tool. The Everstart 60108m (often grouped with the 60108 series by Walmart’s in-house brand) is one of the most popular affordable automatic battery chargers on the market. However, like any piece of technical equipment, you cannot operate it safely or effectively without the proper instructions. everstart battery charger 60108m manual

Included components

• Charger unit with integrated power cord
• Positive (red) and negative (black) battery clamps (insulated)
• Optional ring-terminal harness for permanent connection
• User manual and safety sheet

Charging modes and recommended use

• Bulk/fast charge: Uses maximum current until battery ~80–90% charged; use for quick replenishment but monitor battery temperature.
• Absorption/finish: Reduces current as battery approaches full voltage to avoid overcharge.
• Float/maintenance: Keeps battery at safe full charge for long-term storage; ideal for seasonal vehicles.
• Repair/desulfation (if available): Pulsed high-voltage/low-current treatment to reduce sulfate buildup; use sparingly and follow manual warnings.
• Cold-weather compensation: If charger has temperature compensation, use recommended settings for cold climates.

• Turn off vehicle ignition and electrical loads.
• Connect clamps: attach red clamp to battery positive terminal (+). Connect black clamp to chassis ground or battery negative terminal (−) per manual instructions (grounding to chassis preferred to reduce spark risk).

Why? This final connection away from the battery prevents sparking near hydrogen gas. The EverStart 60108M is a 12V smart digital