Epson L382 Waste Ink Pad Reset ❲Quick × 2027❳

Epson L382 Waste Ink Pad Reset: A Comprehensive Review

What is a Waste Ink Pad?

1. Turn off the printer.
2. Hold the “Stop” + “Ink” + “Power” buttons (exact combo varies).
3. Release only Power once the printer starts, then release others.
4. Run the Adjustment Program.
5. Select “Waste Ink Pad Counter” and then “Initialization”.
6. Exit and restart the printer.

5. Important warnings

• Do not reset repeatedly without cleaning/replacing the pad – ink will leak inside, possibly onto the mainboard or power supply.
• This reset method is not officially supported by Epson and may void your warranty.
• If your printer is still under warranty, contact Epson support for a free pad replacement (some countries offer this as a service).

Option A – Replace the pad

• Turn on the printer while holding the “Stop” (red circle) and “Power” buttons.
• Release buttons when the power light flashes, then hold “Stop” again for 5 seconds.
• The printer is now in service mode (all lights may behave differently).

This excess ink doesn’t just disappear. It flows through a tube system into a sponge-filled tray at the bottom of the printer: the Waste Ink Pad. epson l382 waste ink pad reset

• Flashing lights on the "Ink" and "Paper" LEDs simultaneously.
• A computer error message stating: "A printer’s ink pad is at the end of its service life. Please contact Epson Support."