The Epson Adjustment Program (also known as a resetter) for the Epson L1210 Go to product viewer dialog for this item.
Other useful functions
To use the adjustment program for a waste ink pad reset, follow these general steps found in standard Epson servicing procedures: Preparation: Connect your Epson L1210 to your PC via a (wireless resets are often unreliable or unsupported). Select Model: AdjProg.exe and click the button. Choose from the model list and ensure the port is set to Auto Selection or the specific USB port your printer is using. Adjustment Mode: Particular Adjustment Mode Counter Selection: Find and select Waste ink pad counter from the list and click Check Status: epson adjustment program l1210
is a maintenance utility used primarily to resolve "Service Required" errors caused by the printer's waste ink pad counter reaching its limit. While Epson typically reserves these tools for authorized service centers, they are often used by experienced users to extend the life of their printer without a professional service visit. Key Functions The Epson Adjustment Program (also known as a
Shipping Setting: Used to prepare the printer for transportation by locking the print head. Right-click the AdjProg
Technically, unlimited times. But physically, the pad can only be cleaned/replaced 3–5 times before the sponge holder breaks or ink leaks into the mainboard. Most users get 3 resets over 5 years.
Q: Can I use an L3110 program on my L1210? A: Never. Different models have different EEPROM address maps. Using the wrong program can "brick" your printer (permanent logic board failure).
AdjProg.exe file and select Run as Administrator.