The Deca Decastar 150E is a versatile, semi-automatic MIG/MAG welder designed for both gas and gasless (flux-cored) operations. Known for its European design and portability, it is frequently used for light fabrication and equipment repair. Technical Specifications
| Error | Meaning | Solution (from manual) |
|-------|---------|------------------------|
| ERR01 | EEPROM failure | Replace mainboard. Attempt reset via r.St in Tech Menu. |
| ERR03 | A/D converter not responding | Check power supply (minimum 12V DC). Check internal ribbon cable. |
| ERR05 | Weight exceeds max + 9d | Remove load. Check for mechanical binding. |
| ERR08 | Underload (negative overload) | Calibration zero lost. Perform C.IN again. Check load cell wiring (Excitation +/-). |
| ERR31 | Calibration weight error | Applied weight < 1% of full scale. Use larger test weight. |
| Lo BAT | Low battery (if backup option fitted) | Replace internal battery or connect mains. | decastar 150e manual
Wire Speed: Controlled by a dedicated potentiometer knob; this directly adjusts the amperage. The Deca Decastar 150E is a versatile, semi-automatic
(using shielding gas), making it adaptable for indoor and outdoor work. Manual Wire Feed Attempt reset via r