Compair Cyclon 111 Manual Patched -

Searching for a specific manual for the CompAir Cyclon 111 can be tricky because this series (including models like the 105, 107, 108, 111, and 222) often shares a consolidated user manual. Helpful Documentation & Resources

• ✅ Check the pocket inside the compressor’s electrical panel (original owners often store it there).
• ✅ Contact Gardner Denver / CompAir support directly.
• ✅ Join compressor technician forums (e.g., CompressorParts.com forums) where users share scanned manuals.

Proper maintenance is critical for maintaining the CompAir warranty and preventing downtime. Daily: Check oil levels and condensate drains. Compair Cyclon 111 Manual

If you are looking for technical guidance, maintenance steps, or troubleshooting for the Cyclon 111, the following resources are your best bet: Consolidated User Manual: The Cyclon 105-222 User Manual Searching for a specific manual for the CompAir

Fault 1: "High Discharge Temperature" (>105°C)

• Likely cause: Clogged oil cooler or low oil level.
• Manual remedy: Shut down. Allow cooling. Use a thermal gun to check cooler inlet vs outlet. If delta >15°C, clean the cooler with compressed air from the inside out.

The unit utilizes a single-stage, oil-injected rotary screw compression element. maszyneria.com Surescan Control System: The unit is managed by the Surescan electronic controller ✅ Check the pocket inside the compressor’s electrical

4.4 Stopping Procedure

1. Press the STOP button.
2. The compressor will unload and run-on for a short period to cool down the air end.
3. The motor will stop automatically.
4. Depressurize the unit manually if maintenance is required (using the manual drain valve).