Canon+service+tool+st+5510+free+download+install [upd] [DIRECT]

You're looking for information on how to download and install the Canon Service Tool ST-5510. Here's what I can put together for you:

1. Download the utility from the official developer’s website.
2. Put your printer into Service Mode (usually: turn off, hold Stop/Reset + Power, release Stop/Reset, press Stop/Reset again, then release Power).
3. Run the tool and select “Waste Ink Counter Reset.”
4. Follow on-screen instructions.

Offers deeper cleaning options than the standard consumer driver. Model Support: canon+service+tool+st+5510+free+download+install

Step 1: Enter Service Mode

1. Turn off the printer (ensure the power cord is plugged in).
2. Press and hold the Resume/Cancel button (usually marked with a triangle inside a circle).
3. While holding the Resume button, press and hold the Power button.
4. While holding the Power button, release the Resume button.
5. Press the Resume button 5 times (for most models), then release both buttons.
6. The LED light should blink or stay solid green, indicating the printer is in Service Mode.

Warning: Do not touch "Clear EEPROM" or "Ink Absorber Setting" unless you are a technician. That will destroy your printer’s calibration data. You're looking for information on how to download

Steps using a typical paid utility:

How to reset page counter for ink absorber full (error 5B00)? - iFixit Offers deeper cleaning options than the standard consumer

The Ultimate Guide to the Canon Service Tool ST-5510: Free Download, Installation, and Usage

Introduction

If you own a Canon PIXMA or MAXIFY printer, you have likely encountered the dreaded "Service Error 5B00," "5B01," or "Ink Absorber Full" message. When this happens, your printer becomes a brick—refusing to print until a mysterious internal counter is reset.