Bodor Pro - 2.0 Software !!link!! Download

BodorPro 2.0 is the dedicated CNC control system for Bodor fiber laser cutting machines, specifically designed for sheet and tube processing. It serves as a comprehensive interface for importing graphics, nesting parts, and managing the actual laser cutting process. 📥 Software Access & Downloads

Double Camera Support: For fully enclosed machine series, Bodor Pro 2.0 supports a dual-camera system that combines the processing interface and the monitor interface.

Automatic Typesetting: Simplifies preparation with both manual and automatic nesting/typesetting capabilities. Bodor Pro 2.0 Software Download

Step 3: Install USB Dongle Driver

When prompted, connect the green Bodor software key (dongle) to a USB port. The installer will automatically load the Silicon Labs CP210x USB-to-UART driver.

So, what sets Bodor Pro 2.0 apart from other design software on the market? Here are some of the key features that make this tool a game-changer: BodorPro 2

Installation steps (typical)

1. Download the installer from your dealer or Bodor’s support portal.
2. Right-click the installer → Run as administrator.
3. Follow the on-screen prompts; install required drivers when prompted.
4. Restart the PC after installation.
5. Connect the laser controller and activate the software using the provided license/key/dongle.
6. Load a small test job to verify communication and basic motion.

Dual-Mode Configuration: One software package handles both plane (sheet) cutting and tubing (pipe) cutting, allowing users to switch between modes freely within the same interface.

To ensure stable operation, the host computer must meet these minimum specifications: Download the installer from your dealer or Bodor’s

Step 4: Driver Installation

When the system prompts you to install "USB Serial Drivers" or "Network Adapters," click Install. A pop-up may appear asking for permission—click "Allow."