Powering On: Plug the unit into a 120V AC outlet. The display will show the current room humidity. Setting Modes: Press the Mode button once for the High setting. Press again for Medium and a third time for Low.
Unplug the unit. Remove the water tank.
Empty the base: Pour out any standing water from the reservoir inside the base.
Clean the tank: Fill tank with 2 cups of white vinegar and 1 cup of water. Swish vigorously, let sit for 20 minutes. Rinse thoroughly with cool water.
Clean the base: Dampen a cloth with undiluted white vinegar and wipe the ultrasonic diaphragm (metal disc) and the float valve. Use the provided cleaning brush to gently remove mineral deposits. Never scrape the disc with metal tools.
Rinse: Wipe everything with a clean, damp cloth. Dry with a soft towel.
If no mist is produced despite a full tank, ensure the unit is on a level surface and check for mineral deposits on the nebulizer. Condensation:
Do not aim the mist nozzle directly at furniture, walls, or electrical outlets.
Powering On: Plug the unit into a 120V AC outlet. The display will show the current room humidity. Setting Modes: Press the Mode button once for the High setting. Press again for Medium and a third time for Low.
Unplug the unit. Remove the water tank.
Empty the base: Pour out any standing water from the reservoir inside the base.
Clean the tank: Fill tank with 2 cups of white vinegar and 1 cup of water. Swish vigorously, let sit for 20 minutes. Rinse thoroughly with cool water.
Clean the base: Dampen a cloth with undiluted white vinegar and wipe the ultrasonic diaphragm (metal disc) and the float valve. Use the provided cleaning brush to gently remove mineral deposits. Never scrape the disc with metal tools.
Rinse: Wipe everything with a clean, damp cloth. Dry with a soft towel.
If no mist is produced despite a full tank, ensure the unit is on a level surface and check for mineral deposits on the nebulizer. Condensation:
Do not aim the mist nozzle directly at furniture, walls, or electrical outlets.
