Biesse Rover Manual Nc 500 -
The Ultimate Guide to the Biesse Rover Manual NC 500: Operation, Maintenance, and Troubleshooting
Introduction
In the world of woodworking and CNC machining, few names command as much respect as Biesse. The Italian manufacturer has been a cornerstone of industrial automation for decades. Among its extensive lineup, the Biesse Rover Series stands out as a versatile workhorse for panel processing, solid wood machining, and complex nesting operations.
| Error Code | Meaning | Likely Fix |
| :--- | :--- | :--- |
| AL 101 | X-axis drive fault | Check X-axis motor cable. Check for mechanical obstruction on the rack. |
| AL 205 | Spindle not at temperature | Wait for warm-up cycle to finish (Usually 5 mins). Bypass only if emergency. |
| AL 307 | Air pressure low | Verify shop air is >6 bar. Check air dryer. Manual override: [AUX] + [SKIP]. |
| AL 413 | Tool holder not clamped | Clean the spindle nose. Check for broken drawbar springs. Re-run tool change macro. |
| AL 520 | Emergency stop active | Check physical E-stop buttons. Also check limit switches on X/Y/Z overtravel. |
| AL 602 | Oil lubrication pressure fault | Refill oil tank. Check the distributor block for clogs. |
| AL 899 | NC 500 software watchdog | Hard reboot (Turn off main switch for 60 seconds). If persistent, reinstall NC software. | Biesse Rover Manual Nc 500
- Use Biesse-approved tools and accessories
- Follow proper tool changing procedures
File Compatibility: Capable of importing .dxf and .cid files, facilitating integration with various CAD/CAM design software. 2. Core Operational Procedures The Ultimate Guide to the Biesse Rover Manual
Graphical Support: Includes CAD software as standard, making it easier to visualize toolpaths. Use Biesse-approved tools and accessories Follow proper tool
Step 3: Setting Speeds
- Rapid override: Reduce to 10% when approaching fixtures.
- Feed override: Keep at 100% for manual routing, but 30% for initial tool touch-off.